NMR spectroscopic structure elucidation of the products of the reaction of 3-(3-aryl-3-oxopropenyl)- chromen-4-ones with 1,2-phenylenediamine

The reaction of 3-(3-aryl-3-oxopropenyl)chromen-4-ones with 1,2-phenylenediamine resulted in the unexpected formation of 10a-aryl-1,2,10,10a-tetrahydrobenzo-[4,5]-imidazo[1,2-a]pyridin-3-yl(2-hydroxyphenyl)-1-methanones. Their structure elucidation and complete 1H and 13C assignments have been performed by a combination of various one- and two-dimensional NMR experiments.     

计算机立体视觉技术综述

计算机立体视觉技术主要有双像合成法、莫尔条纹法、傅立叶变换轮廓法、位相测量法、三角测距法、聚焦法、飞行时间法和光谱法。分析了各种方法的基本原理和主要优缺点,提出了一种新的方法———光谱法,并对该方法作了分析介绍,讨论了该方法的特点。     

产生蓝色相干辐射和实现Nd:YAG 1.0642μm倍频90°非临界相位匹配的Nb:KTiPO4

本文报道了用熔盐顶部籽晶法生长Nb浓度(0～13)mol%的Nb:KTP晶体的倍频的Ⅱ型相位匹配的截止波长和Nd:YAG1.0642μm及Nd:YA1O₃1.0795μm激光在这些晶体中倍频的最佳相位匹配角的测量结果.从中可看出,由于Nb⁵⁺的引入使KTP晶体倍频的Ⅱ相位匹配的截止波长有效蓝移,目前已使截止波长蓝移至937nm且有效产生468.5nm的倍频蓝光.同时Nb⁵⁺的引入使Nd:YAG1.0642μm激光和Nd:YA1O₃倍频的最佳相位匹配方向产生很大的变化,目前已使Nb:KTP晶体倍频的最佳相位匹配方向为θ=88.32°、Φ=0°,非常接近于90°非临界相位匹配方向.     

高峰值功率1．57μm脉冲激光器的研究

KTP非线性频率转换技术是实现人眼安全激光的有效方法,为了获得高峰值功率人眼安全激光,设计了一种级联式1．06μm泵浦非临界相位匹配环形腔KTP光参量振荡器一光参量放大器,并对其激光输出进行了测试,结果证明该光参量振荡器输出激光波长1．571μm,激光峰值功率42MW,光光转换效率35％,能量稳定度2．5％。该技术已用于计量检测标准光源,并在远程人眼安全激光测距仪、激光雷达等装备中具有应用前景。     

Entropy of Badminton Strike Positions

The aim of the current study was twofold: (i) to investigate the distribution of the strike positions of badminton players while quantifying the corresponding standard entropy and using an alternative metric (spatial entropy) related to winning and losing points and random positions; and (ii) to evaluate the standard entropy of the receiving positions. With the datasets of 259 badminton matches, we focused on the positions of players’ strokes and the outcome of each point. First, we identified those regions of the court from which hits were most likely to be struck. Second, we computed the standard entropy of stroke positions, and then the spatial entropy, which also considers the order and clustering of the hitting locations in a two-dimensional Euclidean space. Both entropy quantifiers revealed high uncertainty in the striking position; however, specific court locations (i.e., the four corners) are preferred over the rest. When the outcome of each point was taken into account, we observed that the hitting patterns with lower entropy were associated with higher probabilities of winning points. On the contrary, players striking from more random positions were more prone to losing the points.     

基于场匹配法的双排矩形栅慢波结构高频特性研究

本文运用场匹配法对具有任意位错的双排矩形栅慢波结构的场分布、色散特性及耦合阻抗进行了研究．研究结果表明,场匹配法推导的色散特性与仿真软件CST和HFSS计算的结果完全一致,耦合阻抗介于CST和HFSS之间．在此基础上,详细研究了上下两排系统之间位错对色散特性及耦合阻抗的影响．当位错严格为半个周期时,第一阻带消失,第一个模式最高截止频率与第二个模式最低截止频率重叠,发生简并;当位错为0．45倍周期时,在保证耦合阻抗不变的情况下,基模的通带虽降低了2．8GHz,但阻带却增大了7．9GHz,从而可以有效避免简并及模式竞争的发生．     

基于双目立体视觉的视线跟踪系统标定

针对使用主动红外光的视线跟踪系统存在的限制,构建了在自然光条件下允许头部自然移动的视线跟踪系统,该系统通过双目立体视觉系统获取眼睛特征参数,在三维空间中重构眼睛视线向量来估计眼睛的视线。通过头戴式标定板来估计头部姿态,减少了视线跟踪过程中头部移动带来的误差影响;提出了一种视线跟踪系统中个人参数的标定方法,该方法先假定眼睛视轴与光轴重合,由此计算出眼球的中心、半径、眼睛视轴与光轴的夹角的初始估计值,用非线性优化算法对这些初始值进行优化。通过实验表明,提出的视线跟踪算法对使用者限制较少,同时具有较高的视线估计精度,能满足很多视线跟踪应用场合的需要。     

Precise perimeter measurement for 3D object with a binocular stereo vision measurement system

A novel measurement scheme for a three dimensional (3D) object's surface boundary perimeter is proposed. This scheme consists of three steps. First, a binocular stereo vision measurement system with two CCD cameras is devised to obtain the two images of a detected object's 3D surface boundary. Second, two B-spline active contours are applied to converge to the object's contour edges accurately in the two CCD images to perform the stereo matching. Finally, for the reconstructed 3D active contour, its true contour length is computed as the detected object's true boundary perimeter. An experiment on a bent surface's perimeter measurement indicates that this scheme's measurement repetition error decreases to 0.6%.     

基于泄漏模共振的多层介质膜光栅宽角谱特性实现

基于泄漏模共振产生多层介质膜光栅（MDG）的-1级高衍射效率的理论,重点分析了产生MDG的-1级宽衍射角谱的物理机理,提出薄匹配层能有效提高MDG的-1级衍射角谱带宽.采用傅里叶模式理论计算MDG的衍射效率,给出了中心波长为1040 nm,Littrow角37.9°附近±11°范围内衍射效率大于90%的宽角谱MDG设计结果,且设计参数具有良好的工艺宽容度. 关键词： 介质膜光栅 泄漏模共振 匹配层 宽角谱     

基于自映像的光子晶体波导分束器的设计

通过研究2维正方晶格光子晶体波导多模干涉的自映像效应,优化设计了一种新型1×2光子晶体波导分束器,采用时域有限差分法对其传输特性进行模拟分析。设计过程中,根据多模干涉耦合区中周期出现的双重像的位置确定两个单模输出波导的位置,通过在分束器输入和输出耦合区的连结处设置介质柱,改变输入和输出耦合区中的模场分布,实现模式匹配,从而明显减小分束器的反射损耗。计算结果表明:设置的介质柱归一化半径分别为0.08和0.177时,对于波长为1.55μm的入射光,该分束器的透射率可高达93%。